How To Remove Popsocket To Reuse

Download Article

Download Article

Popsockets are one of many trendy items to hit the scene, and for good reason. If yous own one, you know how fun it is to utilize! Once attached to your phone or tablet, you can fiddle with the top of a popsocket by pulling information technology in and out. Yet, y'all may somewhen want to remove your popsocket and stick it somewhere else. Doing this is very easy. All you have to exercise is slide your fingernails underneath the base of operations and tug lightly.

1. 1

   Push the peak of the popsocket downwards if it's expanded. Don't try to remove the popsocket from your device while it is even so expanded. The popsocket could potentially detach from its base during the removal process.

2. 2

   Work your fingernails under the base of operations of the popsocket. Printing your fingernails confronting the sides of the popsocket's base and push until you can experience them sliding underneath. You don't need to push button very far—just enough until yous have a good grasp on the popsocket. Y'all should already be able to experience the base of operations of the popsocket pulling away from your phone.^[1]

   • Slide a few inches of dental floss under your popsocket if your fingernails won't fit under the base.

   Advertising

3. 3

   Pull the popsocket off of your telephone slowly. Grip the popsocket lightly as you pull. Work slowly and gently until the popsocket comes off. Try peeling the popsocket off, starting from ane side and pulling toward the other.^[two]

Advertisement

1. 1

   Run the base of operations of the popsocket under common cold water for 3 seconds. Your popsocket is small and already very sticky, and then you lot won't demand a lot of water to clean it and help information technology restick. Too much water could lengthen its drying fourth dimension past the 15 infinitesimal limit and ruin its stickiness.

2. 2

   Let the popsocket dry for around 10 minutes. Leave your popsocket out in the open up air to dry naturally. Lay it on a newspaper or material towel with the gummy side facing up.

   • Avert letting your popsocket sit down out for any longer than 15 minutes. Otherwise, it will lose its ability to stick.
   • If your popsocket still isn't dry after 10 minutes, wipe the base of operations gently with a paper towel.

3. three

   Stick the popsocket back onto your phone or some other apartment surface. Any clean, apartment surface volition do. Nevertheless, keep in mind that a popsocket may not stick likewise to surfaces made from leather or silicone, or waterproof surfaces. Mirrors, windows, tablets, and smartphones are the all-time surfaces to attach a popsocket to.

   • Let your popsocket rest for around 1 hour earlier expanding or closing it. This will give information technology enough fourth dimension to fully adhere to your phone again.

Advertisement

Add together New Question

• Question

  Is it prophylactic to throw away my PopSocket later on information technology's been used?

  

  This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.

  

  wikiHow Staff Editor

  Staff Reply

  Yep, it is safe to throw away your PopSocket. Try to reuse it as much as possible (it should last for at least 100 times removal and reattachment and around 12,000 times of expansion and plummet co-ordinate to the manufacturer), to make the most of information technology and keep it out of landfill that little flake longer. A quick search of the PopSockets website as of April 2022 failed to produce an answer as to the production's ability to be recycled, possibly email them if yous wish to find out.

• Question

  Can I use a PopSocket in the car?

  

  This answer was written by 1 of our trained team of researchers who validated it for accuracy and comprehensiveness.

  

  wikiHow Staff Editor

  Staff Answer

  Yes, there is a special car vent mount that tin be purchased and attached to an air vent of your car. Once in place, but slide the PopSocket into the mount and it'll hold your phone in identify.

• Question

  Can you lot reuse a PopSocket?

  

  This respond was written by one of our trained team of researchers who validated it for accurateness and comprehensiveness.

  

  wikiHow Staff Editor

  Staff Answer

  Yes, you tin can reuse a PopSocket; the manufacturer claims it tin exist reused upwardly to 100 times. Afterward removing the PopSocket, take care to reattach it within 15 minutes; oherwise, leaving it exposed to air can dry out the gel. Bank check the stickiness of the grip before reusing; if it seems less sticky, this tin be reactivated by dipping the grip into a little h2o, then leaving the PopSocket on a dish to air dry out for about 10 minutes. Then it'll be set up to reattach to your phone or other surface.

• Question

  Are PopSockets waterproof?

  

  This answer was written by one of our trained squad of researchers who validated it for accuracy and comprehensiveness.

  

  wikiHow Staff Editor

  Staff Respond

  Yes, PopSockets are waterproof. They are made from a mix of polyurethane, polycarbonate and TPU, which ensures they're waterproof. However, while the PopSocket is waterproof, your telephone isn't, so be careful when placing the phone near water.

• Question

  What is the purpose of a PopSocket?

  

  This reply was written by one of our trained team of researchers who validated information technology for accuracy and comprehensiveness.

  

  wikiHow Staff Editor

  Staff Respond

  A PopSocket is basically a small-scale stand or a grip for your phone or tablet device. Once the PopSocket is in identify (or you tin add two to a larger device, if needed), it allows you to rest the telephone on surfaces or grip the phone with ease. Information technology also has a gap suitable for wrapping your earbuds around when they're non in use, to prevent them from tangling.

• Question

  How exercise you lot fix a PopSocket that won't stick?

  

  This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.

  

  wikiHow Staff Editor

  Staff Answer

  Dip the grip of the PopSocket into a little water for a few seconds to reactivate the stickiness, then let information technology dry out for most ten minutes before reattaching. If this fails to piece of work, it's possible the PopSocket has been reused and so many times it's no longer able to be reused (the manufacturer suggests is can be removed and reattached at least 100 times before information technology stops working).

• Question

  Can I reattach it to another case?

  

  Bluish Dolfin (BlueDolfin2004)

  Community Answer

  Yes, unless the case is leather, waterproof, or made of safety/silicone, then it won't concur also if at all.

• Question

  My popsocket but won't come off. I've tried using thread because there'south no dental floss in my firm, just it didn't piece of work. What can I do?

  

  If yous are having trouble removing popsocket, then you tin can use tools such as a pair of scissors or a razor to wedge underneath the adhesive. Just be careful not to cut yourself!

• Question

  How can I remove it with curt nails and without dental floss?

  

  I slid my credit card between the telephone and PopSocket and it worked great.

• Question

  What practise I do if my PopSocket popped off its base? How do I reattach it?

  

  Take the top and insert one tab in the aligning pigsty, the echo. On the concluding pigsty, use your fingernails to pull open the base a bit and it should be working again.

Evidence more than answers

Enquire a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Advertizement

Video

1. To remove a Popsocket that has a finger loop instead, apply your fingernail to slightly pry and lift upward the Popsocket to unstick it from the agglutinative. And then use a thin flat tool (such as a dull butter knife) to slowly lift up the Popsocket even more until it comes off your telephone completely.

• If your nails aren't long enough or if yous're worried about them breaking, use a newspaper clip or safety pin.

• Don't worry virtually aligning the graphic on acme of your popsocket as you reposition information technology. You tin prepare the graphic's positioning by twisting the top of the popsocket once you reattach it.^[3]

Thanks for submitting a tip for review!

Advertisement

Almost This Article

Article Summary X

If you demand to remove a popsocket from your phone, push down on the acme of the popsocket to ensure information technology'southward non expanded. Work your fingernails under the base of operations of the popsocket, then slowly peel the popsocket off of your phone. If your fingernails won't fit, try sliding a few inches of dental floss under the popsocket instead. Keep reading to larn how to clean and reattach the popsocket!

Did this summary help you lot?

Thanks to all authors for creating a folio that has been read 622,356 times.

Is this article up to date?

Source: https://www.wikihow.com/Remove-a-Popsocket

Share this post